Dentsply Sirona Picks COX RapidHeat Sterilizer for CEREC Omnicam

rapidheat_hresimg_97374-002The COX RapidHeat Sterilizer has been validated by Dentsply Sirona as the preferred technology to sterilize the mirror sleeve of Dentsply Sirona’s CEREC Omnicam digital impression system.

Dentsply Sirona has determined that CEREC Omnicam mirror sleeves are not sterilizable using steam and can only be sterilized using dry heat, stating in their CEREC Camera – Care, Cleaning, Disinfection and Sterilization Manual, 07-2016 edition: “The mirror sleeves are not autoclave sterilizable!”

The guidelines of CDA and ADA state that sterilization is required over high-level disinfection when a critical or semi-critical instrument is labeled as heat-tolerant.
The COX RapidHeat™ Sterilizer Offers:

  • FDA Cleared 6 and 12-minute cycles with 12-log kill
  • Environmental Safety and Minimal Maintenance
  • Independent Energy-Efficient Certification

The COX RapidHeat sterilizer does not require water, steam or toxic chemicals. With the absence of water, steam and chemicals there is no corrosion, pitting or dulling of dental instrumentation using the COX RapidHeat sterilizer.

COX RapidHeat Sterilizer has been recently proven by an independent 3rd party to average 84% less energy per sterilization cycle than steam sterilizers.

For more information: Call Toll Free 800-828-6011, ext. 1372 or e-mail