Oral Health Group

March 5, 2019 News News

IDS Specials at Dentsply Sirona’s Booths for Experts, Collectors and Individualists

by Dentsply Sirona

As part of their daily work, dentists and dental technicians have to master many challenges in their profession. They are required to demonstrate manual skills, knowledge of human nature, an ability to concentrate, and an ability to improvise that should

August 27, 2018 News News

Digital Dentistry Speeds Up Lab’s Productivity with 3D Printers, Intraoral Scanners

by Frost & Sullivan

Frost & Sullivan’s latest end-user analysis, Digital Dental Solutions Market, Forecast to 2020, finds that dental practices and dental laboratories have recognized the importance of adopting digital dental solutions in the United States and the EU5 countries (United Kingdom, Spain,

July 10, 2017 Product Spotlight

Kulzer Launches cara Print 4.0 3D Printer for Dental Laboratories

by Kulzer GmbH

Kulzer announced today that it is launching cara Print 4.0, a 3D printer capable of printing a wide and expanding range of dental appliances for dental laboratories. The printer rounds out a comprehensive line of digital workflow solutions offered under

March 31, 2017 Product Spotlight

Superior and More Affordable Solutions for Dental Labs from 3Shape

by 3Shape

3Shape to present at IDS its brand-new line of high quality, more affordable, E dental lab scanners and flexible LabCare subscription models to make CAD/CAM digital dentistry more cost effective for dental laboratories. Superior and more affordable 3Shape lab scanners

Minimal-Prep
November 9, 2016 Feature Dental LaboratoriesEditorialOral Health

The Beauty – And Logic – Of Minimal-Prep Veneers

by Chuck Maragos, CDT and Jenny Wohlberh, AAACD

If you’ve ever seen vintage photography, you’ll notice an absence of toothy grins. Somber, tight-lipped portraits ruled the day well into the early 20th century. This was probably for the best, since most smiles were not photogenic. Before the 1920s,

November 9, 2016 Feature Clinical case reportCosmetic / AestheticDental Laboratories

Prep”Less” Veneers: Treating Tooth by Tooth Instead of Case by Case

by Dr. med.dent. Holger P. Meiser DDS, MAGD Holger Dental Group

Abstract The patient treated in this report was not pleased with the appearance of his smile and his confidence to smile was affected. He desired ‘bigger’ and ‘whiter’ teeth. As with any elective cosmetic restorative procedure, a minimally-invasive approach providing

Digital Smile Design
August 19, 2016 Feature Dental CAD/CAMDental LaboratoriesDental TechnologyOral Health

Advantages of Digital Smile Design: A Case Study

by By: Amarjit Rihal, DMD, FICD, FPFA; Tim Dumore DMD, BSc, MSc, FRCD(C), DipABO, FICD, FPFA; Les Rykiss DMD, FIADFE

The prevalence of impacted cuspids is approximately one to two percent of the population.  For those individuals with impacted cuspids who seek orthodontic treatment, they can expect more complicated mechanics and increased treatment time.  There is a similar prevalence of

August 19, 2016 Feature Dental LaboratoriesDental TechnologyMaterials & TechnologyOral Health

Digital Dentistry: What Change Could Look Like In Your Lab

by George Cowburn

In our last article in Oral Health Labs’ Fall 2015 edition, we looked at how digital dentistry is slowly crossing the adoption cycle chasm. Digital dentistry has been slow in coming, largely because the learning curve for new methods and

August 17, 2016 News AnnouncementDental LaboratoriesDental OfficeNews

Henry Schein Announces Takeover of Dental Supplies Ltd In Newfoundland and Labrador

by Oral Health

Henry Schein, Inc. (Nasdaq: HSIC), the world’s largest provider of health care products and services to office-based dental, animal health and medical practitioners, today announced the acquisition of Dental Supplies Limited (Dental Supplies), a leading full-service distributor serving dental practices

September 29, 2011 News Dental Laboratories

Annual session course on dental labs first of its kind

by ken

September 28, 2011 – ADA News Staff By Kelly Soderlund LONG LONG LONG LONG OVERDUE IN THIS WRITER’S OPINION The 2010 House of Delegates resolved to encourage certified dental technicians to attend ADA continuing education seminars, including as presenters. That

May 8, 2011 News CAD/CAMDental LaboratoriesInnovations in dentistryNew Technologies

Objet to Showcase Exceptionally Detailed and Accurate Dental Models at LMT LAB DAY West

by ken

From PRNewswire – May 7, 2011 BILLERICA, Mass.  Objet Geometries Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing, will demonstrate the benefits of adding 3D printing to the workflow, at LMT LAB DAY West. Exhibiting at Booth B6, B-7, Objet